学術論文
  1. 土田紀之，鳥塚史郎，長井寿，上路林太郎，超微細フェライト-セメンタイト鋼の静的引張特性に及ぼすセメンタイト体積率の影響，鉄と鋼，96 (2010), 42.

  2. Y.Aoyama, M.Komada, Y.Kuroda, T.Takahashi, N.Tsuchida, Y.Harada and K.Fukaura, Mechanical Properties of Ni-Free High-Nitrogen Austenitic Stainless Steel made by Metal Injection Molding with Nitrogen Absorption Method, J. Jpn. Soc. Powder Powder Metallurgy, 56 (2009), 103.

  3. 青山陽亮，黒田義和，高橋輝男，土田紀之，原田泰典，深浦健三，金属粉末射出成形で作製したオーステナイト系ステンレス鋼の引張特性に及ぼす窒素添加と変形双晶の影響，粉体および粉末冶金，56 (2009), 98.

  4. R.Ueji, N.Tsuchida, D.Terada, N.Tsuji, Y.Tanaka, A.Takemura and K.Kunishige, Tensile Properties and Twinning Behavior of High Manganese Austenitic Steel with Fine-grained Structure, Scripta Mater., 59 (2008) 963.

  5. 土田紀之，守本芳樹，岡本尚士，深浦健三，原田泰典，上路林太郎，準安定オーステナイト系ステンレス鋼のTRIP効果における加工誘起マルテンサイト変態の役割，日本金属学会誌， 72 (2008), 769.

  6. Y.Tomota, A.Narui and N.Tsuchida, Tensile Behavior of Fine-grained Steels, ISIJ International, 48 (2008), 1107.

  7. N.Tsuchida, K.Fukaura, K.Nagai, Y Tomota, Flow Stress Analysis using the Kocks-Mecking Model for Ferrite-Cementite Steels with various Ferrite Grain Sizes, ISIJ International, 48 (2008), 1020.

  8. N.Tsuchida, H.Masuda, Y.Harada, K.Fukaura, Y.Tomota, K,Nagai, Effect of Ferrite Grain Size on Tensile Deformation Behavior of a Ferrite-Cementite Low Carbon Steel, Materials Science and Engineering A, A488 (2008), 446.

  9. 上路林太郎，土田紀之，藤井英俊，国重和俊，金堂大介，TWIP鋼の室温引張特性に及ぼす平均結晶粒径の影響，日本金属学会誌，71 (2007), 815.
  10. R.Ueji, K.Harada, N.Tsuchida, and K.Kunishige, High Speed Deformation of Ultrafine Grained TWIP Steel, Material Science Forum, 561-565 (2007), 107.

  11. M.Komada, Y.Kuroda, R.Murakami, N.Tsuchida, Y.Harada, K.Fukaura, S.Fukumoto, Metal Injection Molding of Ni-free Austenitic Stainless Steels II -Microstructure and Mechanical Properties-, Advanced Materials Research, 26-28 (2007), 19.
  12. K.Kuroda, M.Komada, R.Murakami, S.Fukumoto, N.Tsuchida, Y.Harada, K.Fukaura, Metal Injection Molding of Ni-free Austenitic Stainless Steels I -Manufacturing process-, Advanced Materials Research, 26-28 (2007), 15.
  13. R.Murakami, Y.Aoyama, N.Tsuchida, Y.Harada, K.Fukaura, Microstructure and Mechanical Properties of Ni-free High Nitrogen Austenite Stainless Steels fabricated by Mechanical Alloying Method, Material Science Forum, 561-565 (2007), 37.

  14. Y.Harada, K.Fukaura, and N.Tsuchida, Grain Refinement of Metal Surface using Hot Shot Peening, Material Science Forum, 539-543 (2006), 1080.

  15. 原田泰典，古川陽介，村尾卓児，森謙一郎，土田紀之，深浦健三，b型チタン合板の多段深絞り加工における成形性と表面粗さの改善，塑性と加工，47 (2006), 850.

  16. Y.Harada, N.Tsuchida, and K.Fukaura, Joining and Shaping Fit of Dissimilar Materials by Shot Peening, Journal of Materials Processing Technology, 177 (2006), 356.

  17. 原田泰典，宇治橋論，梅村貢，小林祐次，土田紀之，深浦健三，ショットピーニングによる塑性流動接合，塑性と加工，47 (2006), 221.

  18. 原田泰典，上杉秀人，森謙一郎，梅村貢，土田紀之，深浦健三，機械構造用鋼の表面特性に及ぼす微細ショットピーニングの影響，塑性と加工，47 (2006), 216.

  19. Y.Harada, T.Murao, K.Mori, N.Tsuchida, and K.Fukaura, Prevention os Seizure in Deep Drawing Using Plastic Die, Materials Science Forum, 505-507 (2006), 763.

  20. N.Tsuchida, Y.Tomota, K.Nagai, and K.Fukaura, A Simple Relationship between Luders Elongation and Work-hardening Rate at Lower Yield Stress, Scripta Mater., 54 (2006), 57.

  21. 朴鍾皓，神田光晴，土田紀之，友田陽，オーステナイト系ステンレス鋼における変形応力のひずみ速度依存性に及ぼす窒素添加の影響，日本金属学会誌，69 (2005), 867.

  22. N.Tsuchida, E.Baba, K.Nagai, and Y.Tomota, Effects of Interstitial Solute Atoms on the Very Low Strain-rate Deformations for an IF Steel and an Ultra Low Carbon Steel, Acta Materialia, 53/2 (2005), 265.

  23. 土田紀之，友田陽，長井寿，超微細フェライト-セメンタイト鋼の高速引張変形挙動，鉄と鋼，90 (2004), 1043.

  24. T.Ono, Y.Tomota, P.Lukas, D.Lugovyy, D.Neov, N.Tsuchida, and K.Nagai, In Situ Neutron Diffraction during Tensile Straining of a Fine-Grained Ferrite-Pearlite Steel, Materials Science and Technology, 20 (2004), 121.

  25. N.Tsuchida, E.Baba, O.Umezawa, K.Nagai, and Y.Tomota, True Stress-True Strain Relations with Very Low Strain Rates at Room Temperature for an Austenitic 25Cr-19Ni steel, ISIJ International, 44 (2004), 209.

  26. 土田紀之，友田陽，長井寿，超微細フェライトセメンタイト鋼の静的引張特性，鉄と鋼，89 (2003), 1170.

  27. Y.Tomota, P.Lukas, S.Harjo, J-H.Park, N.Tsuchida, and D.Neov, In Situ Neutron Diffraction Study of IF and Ultra Low Carbon Steels upon Tensile Deformation, Acta Materialia, 51 (2003), 819.

  28. N.Tsuchida, Y.Tomota, and K.Nagai, High-Speed Deformation for an Ultrafine-Grained Ferrite-Pearlite Steel, ISIJ International, 42 (2002), 1594.

  29. 土田紀之，小野匠，友田陽，長井寿，フェライト-パーライト鋼の引張変形応力におよぼす温度，ひずみ速度とフェライト結晶粒径の影響，日本機械学会論文集A，68 (2002), 1547．

  30. N.Tsuchida, K.Nagai and Y.Tomota, Compromise between Environmental Loads and Performance in Strengthening Steels, Journal of Advanced Science, vol. 13, No. 3 (2002), 269.
  31. N.Tsuchida, Y.Tomota, H.Moriya, O.Umezawa and K.Nagai, Application of the Kocks-Mecking Model to Tensile Deformation of an Austenitic 25Cr-19Ni Steel, Acta Materialia, 49/15 (2001), 3029.
  32. N.Tsuchida, Y.Tomota, H.Moriya, O.Umezawa and K.Nagai, A Description of Stress-Strain Curve of a Ti-Fe-O alloy at various Temperatures and Strain Rates based on Thermal Activation Model, ISIJ International, 40 (2000), 84.
  33. 土田紀之，友田陽，長井寿, 加工熱処理工程における二酸化炭素排出量の推定とMn-Si-C鋼の組織制御によるエコスティール材料設計，鉄と鋼，86, (2000), 181.
  34. N.Tsuchida and Y.Tomota,　A Micromechanic Modeling for Transformation Induced Plasticity in Steels,　Materials Science and Engineering A, A285 (2000), 345.
    　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　
  35. 小谷清二，土田紀之，友田陽，複合組織鋼の変形応力のsecant法を用いた上下界予測と関連ミクロ組織，鉄と鋼，83 (1997), 827.
国際会議発表論文
  1. N.Tsuchida, K.Fukaura, Y.Tomota, A.Moriai and H.Suzuki, Tensile Deformation Behavior of Metastable Austenitic Stainless Steels studied by Neutron Diffraction, Material Science Forum, in press.
  2. N.Tsuchida, S.Torizuka, K.Nagai, R.Ueji, Effect of Dispersed Cementite on Stress-Strain Curves in Ultrafine-grained Ferrite-Cementite Steels, Proceedings of the Second International Symposium on Steel Science (ISSS2009)
  3. R.Ueji, G.D.Torkamani, N.Tsuchida and K.Kunishige, Effect of Grain Size on the Work-hardening Behavior and Deformation Twinning of High-Manganese Austenitic Steel, Proceedings of the Second International Symposium on Steel Science (ISSS2009)

  4. Y.Morimoto, S.Okamoto, K.Fukaura, N.Tsuchida, R.Ueji, Relationship between TRIP Effect and Stress-induced Martensitic Transformation in Metastable Austenitic Steels, Proceedings of the 9th International Conference on Technology of Plasticity (ICTP2008) (2008), 139.

  5. Y.Aoyama, Y.Kuroda, M.Komada, N.Tsuchida, Y.Harada, and K.Fukaura, Microstructure and Mechanical Properties of High Nitrogen Austenitic Stainless Steel fabricated by Metal Injection Molding, Proceedings of the 9th International Conference on Technology of Plasticity (ICTP2008) (2008), 1467.

  6. K.Fukaura, M.Komada, Y.Kuroda, N.Tsuchida, and Y.Harada, Ni-free High Nitrogen Austenitic Stainless Steel made by means of Metal Injection Molding and Nitrogen Absorption Method, Proceedings of the 9th International Conference on Technology of Plasticity (ICTP2008) (2008), 2164.

  7. R.Ueji, K.Harada, N.Tsuchida, Y.Okitsu, K.Kunishige, Effect of Mean Grain Size on Tensile Properties and Dynamic Collapse Properties of TWIP Steel, Proceedings of International Conference on New Developments in Advanced High-Strength Sheet Steels (AHSS) (2008) 277.

  8. N.Tsuchida, Y.Tomota, Y.Harada, K.Fukaura and K.Nagai, Strain Rate Sensitivity of the Ferrite-Cementite Low Carbon Steels with a Wide Range of Grain Size, Proceedings of ISUGS2007 (2007), 138.

  9. F.Yin, N.Tsuchida and K.Nagai, Grain Size Distribution Features and Yield Strength of Ultrafine-Grained Low Carbon Steels, Proceedings of the Second Baosteel Biennial Academic Conference, vol.2 (2006) 7.
  10. N.Tsuchida, Y.Tomota and K.Nagai, High-speed Tensile Deformation Behavior for Ultrafine-grained Steels, Proceedings of the Joint Conference of HSLA Steels 2005 and ISUGS 2005 (2005), 270.

  11. Y.Tomota, N.Tsuchida and J-H.Park, High Strain Rate Deformation Behavior of Steels focusing on Extremely Low Carbon Steels, Proceedings of IF Steels 2003 (2003), 148.

  12. Y.Tomota and N.Tsuchida, Modeling for Continuous Evaluations Method in High-speed Deformation, Proceedings of ICASS 2002 (2002), 69.

  13. N.Tsuchida, Y.Tomota and K.Nagai, High-speed Deformation for an Ultrafine-grained Ferrite-Pearlite steel, Proceedings of ICASS 2002 (2002), 75.

  14. N.Tsuchida, Y.Tomota and K.Nagai, Eco-steel Design for balancing "Environmental Loads" and "Mechanical Properties", Proceedings of the Fourth International Conference on Ecomaterials (1999), 53.

  15. N.Tsuchida, Y.Tomota and K.Nagai, Eco-steel Design for balancing "Environmental Loads" and "Mechanical Properties", Proceedings of the Third International Conference on EcoBalance (1998), 417.

  16. N.Tsuchida, Y.Tomota and K.Nagai, An Eco-steel Design Concept coupled with Properties Predictions and Materials Life Cycle Analysis -Wide Application of a Low Alloy Steel by Microstructural Control-, Proceedings of the Third International Conference on Ecomaterials (1997), 95.

  17. N.Tsuchida, S.Kotani, and Y.Tomota, Microstructure vs. Properties Prediction Method for Eco-steel Design, Proceedings of the Second International Conference on EcoBalance (1996), 459.